Improving the Ability of Productive Teachers in Implementing Teaching Factory Learning Through Workshops at SMK Negeri 7 Palu

Authors

  • ashar ashar SMKN 7 PALU

DOI:

https://doi.org/10.22487/me.v17i1.880

Keywords:

Teaching Factory, Workshop, Kemampuan

Abstract

The motivation for this study was the low ability of productive teachers to carry out the learning process utilizing the Teaching Factory learning model at SMK Negeri 7 Palu. The teaching learning approach is appropriate for use in SMK since it produces graduates who are competent and ready to work. The purpose of this project is to use a workshop to increase the ability of productive teachers to apply learning using the Teaching Factory approach. The focus of this study is a successful teacher at SMK Negeri 7 Palu, which has a total of 12 students. This school action research was conducted in two cycles, with each cycle going through the planning, implementation, observation, and reflection stages. Data in cycle II increased with an average of 94 (A) and 91.67% completeness percentage. As a result of the training, productive teachers at SMK Negeri 7 Palu will be better able to execute Teaching Factory learning.

References

L. N. Kamamia, N. T. Ngugi, & R. W. Thinguri, “To establish the extent to which the subject mastery enhances quality teaching to student-teachers during teaching practice,” International Journal of Education and Research, 2(7), 2014, pp. 641–648.

Uno, B. Hamzah, “Model Pembelajaran Menciptakan Proses Belajar Mengajar yang Kreatif dan Efektif,” Jakarta: Bumi Aksara, 2007.

A. F. Amar, D. Hidayat, A. Suherman, “Penerapan Model Pembelajaran Teaching factory 6 Langkah (model TF-6M) Untuk Meningkatkan Motivasi Berprestasi siswa di SMK,” Journla of Mechanical Engineering Education. 2(2), 2015, pp. 189 – 198.

N. Fajaryati, “Evaluasi Pelaksanaan Teaching Factory SMK Di Surakarta,” Jurnal Pendidikan Vokasi, 2(3), 2012.

D. H. Martawijaya, “Developing a teaching factory learning model to improve production competencies among mechanical engineering students in a vocational senior high school,” Journal of Technical Education and Training (JTET), 4(2), 2012, pp. 45–56.

Gomes, F. Cardoso, “Manajemen Sumber Daya Manusia,” Jakarta: Andi Offset, 2003.

T. Sudiati, “Peningkatan Kinerja Guru Dalam Menetapkan Kriteria, Ketuntasan Minimal Melalui Workshop,” Jurnal Kajian Teori dan Praktik Kependidikan. 3 (2), 2018, pp. 235-236

Osnal, Suhartini, I. Wahyudi, “Meningkatkan Kemampuan Guru dalam Menyusun Tes Hasil Belajar Akhir Semester melalui Workshop di KKG gugus 02 Kecamatan Sumber Malang Tahun pelajaran 2014/2015, 5(1), 2016, pp. 67 – 82.

Gazali, A. Dardiri, S. Soekopitojo, “Penerapan Teaching Factory Jasa Boga untuk Meningkatkan Kompetensi Entrepreneur Siswa Sekolah Menengah Kejuruan,” Jurnal Sosial Humaniora dan Pendidikan. 2 (1), 2017.

E. Sutono, “Peningkatan Kompetensi guru SD dalam perancangan RPP dengan pendekatan Saintifik Melaui Workshop,” Lembaran Ilmu Pendidikan, 4(2), 2017, pp. 81 – 94

I. Siswanto, “Pelaksanaan Teaching Factory untuk Meningkatkan Kompetensi dan Jiwa Kewirausahaan Siswa Sekolah Menengah Kejuruan,” Seminar Nasional 2011 “Wonderful Indonesia,” Yogyakarta. 2011, pp. 396–404.

Downloads

Published

2021-05-31

How to Cite

[1]
A. Ashar, “Improving the Ability of Productive Teachers in Implementing Teaching Factory Learning Through Workshops at SMK Negeri 7 Palu”, ME, vol. 17, no. 1, pp. 67-72, May 2021.

Issue

Vol. 17 No. 1 (2021)

Section

Articles

License

Copyright (c) 2021 ashar ashar

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with Jurnal Media Eksakta agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal. 
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.