PEMANFAATAN SERBUK GERGAJI SEBAGAI BAHAN BAKU BRIKET

Authors

  • Pratiwi Nova Sari Universitas Tadulako
  • Sitti Aminah Universitas Tadulako

DOI:

https://doi.org/10.22487/me.v16i2.740

Keywords:

wood sawdust, briquette charcoal , tapioca flour

Abstract

Wood sawdust is one of the wastes from wood processing industry such as sawdust and peel residues. They are cheap raw materials and potential as a source of alternative energy by processing it into charcoal briquettes. The use of charcoal briquettes as a substitute for fossil energy sources has several advantages including the relatively less smoke emitted because it has been released during the carbonization process. They can be stored for a long time and the calor value is higher than wood. Charcoal briquettes are made from wood sawdust which is added by tapioca flour as glue. This study was conducted in two main stages, processing charcoal briquette and characterization. The characterization of charcoal briquettes are including density, moisture, ash, volatile substances levels, carbon bound, long flame and calor value. The results obtained from the charcoal briquettes are a density of 0.384 gr/cm3, a moisture of 2.44%, an ash of 4.82%, a volatile substance of 19.13%, a carbon bond of 74.44%, a briquette flame of 6.75 minutes/gr and the calor value of 5127 cal/gr. This study concluded that wood sawdust briquette has the potential to be used potentially as substitued for fuel.

References

Ariwidyanata, R., Wibisono, Y., & Ahmad, M. (2019). Karakteristik Fisik Briket dari Campuran Serbuk Teh dan Serbuk Kayu Trembesi ( S amanea Saman ) dengan Perekat Tepung Tapioka Physical Characteristics of Briquettes from Tea Powder Mixture with Adhesives from Tapioca. 7(3), 245–252.

Arman, M. (2018). Pirolisis Bahan Batubara Dan Serbuk Gergaji. Journal Of Chemical Process Engineering, 03(02), 27–32.

Aziz, M. R., Siregar, A. L., Rantawi, A. B., & Rahardja, I. B. (2019). Pengaruh Jenis Perekat Pada Briket Cangkang Kelapa Sawit Terhadap WaktuBakar.Jurnal.Umj.Ac.Id/Index.Php/Semnastek, 04, 1–10.

Bimantara, S. E., & Hidayah, E. N. (2019). Pemanfaatan Limbah Lumpur Ipal Kawasan Industri Dan Serbuk Gergaji Kayu Menjadi Briket. Jukung (Jurnal Teknik Lingkungan), 5(1),21–27. https://doi.org/10.20527/jukung.v5i1.6192

Brožek, M. (2016). The effect of moisture of the raw material on the properties briquettes for energy use. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 64(5), 1453–1458.

Dewi, R., & Hasfita, F. (2016). Pemanfaatan Limbah Kulit Jengkol (Pithecellobium Jiringa) Menjadi Bioarang Dengan Menggunakan Perekat Campuran Getah Sukun Dan Tepung Tapioka. Jurnal Teknologi Kimia Unimal, 5(1), 105.

Djajaeng Sumangat & Wisnu B. (2016). Kajian Teknis dan Ekonomis Pengolahan Briket Bungkil Biji Jarak Pagar Sebagai Bahan Bakar Tungku. Buletin Teknologi Pasca Panen, 5(1), 18–26.

Firdaus, M., Nurdin, H., Sawit, B. K., Tapioka, T., & Kalor, N. (2019). Menggunakan Perekat Tapioka Dan Damar. Jurnal of Multidicsiplinary Research and Development, 491–496.

Indah Suryani, M. Yusuf Permana U., M. H. D. (2012). Pembuatan briket arang Dari Campuran Buah Bintaro Dan Tempurung Kelapa Menggunakan Perekat Amilum. Jurnal Teknik Kimia No. 1, Vol. 18, Januari 2012, 18(1), 24–29.

Indrawijaya, B. (2019). Pemanfaatan Limbah Plastik Ldpe Sebagai Pengganti Agregat Untuk Pembuatan Paving Blok Beton. Jurnal Ilmiah Teknik Kimia, 3(1), 1–7.

Kholik, M. (2019). Pengaruh konsentrasi perekat terhadap karakteristik briket arang campuran serbuk gergaji dan tempurung kelapa. Jurnal Simetris, 10(2), 713–716.

Kurniawan, F. A., & Syukron, A. A. (2019). Karakteristik Briket Bioarang dari Campuran Limbah Baglog Jamur Tiram (Pleurotus Ostreatus) dan Sekam Padi. Indonesian Journal of Applied Physics, 9(02), 76.

Mardan, E. F., Elektro, F. T., & Telkom, U. (2019). Analisa Pengaruh Penambahan Bahan Aditif Pada Briket Analysis The Effect Of Additive Materials Addition On Nilai Kalor Kadar Air > 4000 kalori / gram. 6(2), 4876–4883.

Muzi, I., & Mulasari, S. A. (2014). Perbedaan Konsentrasi Perekat Antara Briket Bioarang Tandan Kosong Sawit Dengan Briket Bioarang Tempurung Kelapa Terhadap Waktu Didih Air. Jurnal Kesehatan Masyarakat (Journal of Public Health), 8(1), 1–10.

Nilai, T., Dan, K., Pembakaran, K., Malakauseya, J. J., & Sasongko, M. N. (2013). Pengaruh Prosentase Campuran Briket Limbah Serbuk Kayu Gergajian Dan Limbah Daun Kayuputih. Jurnal Rekayasa Mesin, 4(3), 194–198.

Nurmalasari, & Afiah, N. (2017). Briket Kulit Batang Sagu (Metroxylon Sagu) Menggunakan Perekat Tapioka Dan Ekstrak Daun Kapuk (Ceiba pentandra). Jurnal Dinamika, 08(1), 1–10.

Olugbade, T., Ojo, O., & Mohammed, T. (2019). Influence of Binders on Combustion Properties of Biomass Briquettes: A Recent Review. Bioenergy Research, 241–259.

Purnomo, R. H., Hower, H., & Padya, I. R. (2015). Pemanfaatan Limbah Biomassa untuk Briket Sebagai Energi Alternatif. Prosiding Seminar Agroindustri Dan Lokakarya Nasional FKPT-TPI, September, 2–3.

Salim, R. (2016). Karakteristik dan Mutu Arang Kayu Jati (Tectona grandis) dengan Sistem Pengarangan Campuran pada Metode Tungku Drum (The Quality and Characteristics of Teak (Tectona grandis) Charcoal Made by Mixed Carbonisation in Drum Kiln). Jurnal Riset Industri Hasil Hutan, 8(2), 53–64.

Silviana, & Anggoro, D. D. (2017). Use of epoxidized waste cooking oil as bioplasticizer of sago starch-based biocomposite reinforced microfibrillated cellulose of bamboo. Advanced Science Letters, 23(3), 2591–2594.

Yuliah, Y., Suryaningsih, S., & Ulfi, K. (2017). Penentuan Kadar Air Hilang dan Volatile Matter pada Bio-briket dari Campuran Arang Sekam Padi dan Batok Kelapa. Jurnal Ilmu Dan Inovasi Fisika, 1(1), 51–57.

Downloads

Published

2020-11-30

How to Cite

[1]
P. N. Sari and S. Aminah, “PEMANFAATAN SERBUK GERGAJI SEBAGAI BAHAN BAKU BRIKET”, ME, vol. 16, no. 2, pp. 98-104, Nov. 2020.

Issue

Vol. 16 No. 2 (2020)

Section

Articles

License

Copyright (c) 2020 Pratiwi Nova Sari , Sitti Aminah

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with Jurnal Media Eksakta agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal. 
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.